C. Single-Family Residential Review
(1) Purpose
The purpose of the single-family residential review procedure is to provide for administrative review of the development of a single-family residence on a lot or parcel zoned for single-family residential use.
(2) Applicability
Single-family residential review shall be required for development of any new building or structure on any existing or new single-family residential lot or parcel, and also for the development of any new building or structure containing up to four multifamily residential units.
(3) Application Submittal and Review Procedure
Figure 8-5 identifies the applicable steps from Section 8.3, Common Review Procedures, that apply to single-family residential review. Additions or modifications to the common review procedures are noted below.
Figure 8-5: Single-Family Residential Review
a. Application Submittal and Handling
The single-family residential review application shall be submitted, accepted, and revised, and may be withdrawn, in accordance with Section 8.3.C, Application Submittal and Handling, with the following modification: All required information relevant to the building of structures on a lot shall be submitted to the Department concurrently with the submission of a building permit application for proposed development.
b. Staff Review and Action
The Director shall review the single-family residential review application based on the general approval criteria in Section 8.3.E(5), Approval Criteria Applicable to all Applications, and the approved subdivision final plat, if applicable. If it is determined that the proposed development meets all applicable requirements, the building permit for the proposed development shall be issued. If it is determined that the proposed development does not comply, the Director shall advise the applicant in writing of the reasons for noncompliance.
c. Post-Decision Actions and Limitations
All common procedures in Section 8.3.H, Post-Decision Actions and Limitations, shall apply.